Blueprints or dimensions of ACA Sirens.

[Z4s]

Hey yall, I was wondering if anybody had dimensions or blueprints to some ACA sirens because I plan to make 1:1 or 1:2 scale sirens. If anybody has dimensions for the Banshee, Penetrator 10 and 15, Screamer 2.5, 5, 7.5, 10, Allertor, etc. It would be very much appreciated. Thanks, Z4s.

[DrDanthrax99]

Here's what I can find:

Allertor 125: Overall assembly is 7 feet long, 3 feet wide, and 5 feet tall
Source: https://www.manualslib.com/manual/15770 ... selected=1

P-10 and P-15
36 inches x 36 inches x 40 inches
Source: https://www.dropbox.com/sh/vbrhaaxqnmmk ... tracking=1

P-50
8 feet long, 6 feet wide, 8 feet tall
Source: https://www.dropbox.com/sh/bexk35cv5ov2 ... al+(1).pdf

Hurricane Mk. II
Head & horn: 82" long by 54" diameter
Blower: 38" wide, 40" deep
Source: http://www.civildefensemuseum.com/siren ... 30_MK2.pdf

Hurricane 130:
Head & horn: 72" long, 11" to 26" wide, 48" tall
Blower: 51" long, 24" wide. 18" tall
http://www.civildefensemuseum.com/siren ... Manual.pdf

Cyclone:
Diameter at widest point: 44 inches
Height: 55 inches
Source: https://www.dropbox.com/sh/vbrhaaxqnmmk ... tracking=1

There should be diagrams of the sirens and their parts contained within the manuals.
These are all the manuals I could find at this time. Someone out there will for sure have the info on the Banshee, Screamer, etc.

[CD_Siren]

I never knew that Hurricanes could do a Fire signal.

[Z4s]

I never knew that Hurricanes could do a Fire signal.

They could! The Square Horn Hurricane had an option to do 5 signals! You can find it in the manual.

[Z4s]

Here's what I can find:

Allertor 125: Overall assembly is 7 feet long, 3 feet wide, and 5 feet tall
Source: https://www.manualslib.com/manual/15770 ... selected=1

P-10 and P-15
36 inches x 36 inches x 40 inches
Source: https://www.dropbox.com/sh/vbrhaaxqnmmk ... tracking=1

P-50
8 feet long, 6 feet wide, 8 feet tall
Source: https://www.dropbox.com/sh/bexk35cv5ov2 ... al+(1).pdf

Hurricane Mk. II
Head & horn: 82" long by 54" diameter
Blower: 38" wide, 40" deep
Source: http://www.civildefensemuseum.com/siren ... 30_MK2.pdf

Hurricane 130:
Head & horn: 72" long, 11" to 26" wide, 48" tall
Blower: 51" long, 24" wide. 18" tall
http://www.civildefensemuseum.com/siren ... Manual.pdf

Cyclone:
Diameter at widest point: 44 inches
Height: 55 inches
Source: https://www.dropbox.com/sh/vbrhaaxqnmmk ... tracking=1

There should be diagrams of the sirens and their parts contained within the manuals.
These are all the manuals I could find at this time. Someone out there will for sure have the info on the Banshee, Screamer, etc.

Thank you very much! I will just have to find out the chopper and stator sizes for them and then I can make these sirens!