Model 120 drill run
Posted: Tue Nov 20, 2018 7:22 pm
Here is a video I forgot to post on here a while back ,but this is it running with a drill that got it up to about 2900 rpms and to about 170 Hz. I was also using a small 1 hp blower that only has about 90 cfm that I have blowing through the ports. If you wanna know why I have it blowing into one of the ports ,read the description on the video. But anyways ,Likely aroud christmas time I will get one of the motors ,or even both. Then next year is when I will get the horns and frame assembly made. And the siren will be on a rolling palate and will not be exsposed to the elements and mounted on a 45 foot pole like the ones that were installed within the 10 mile radius of SONGS.
Heres the video: https://www.youtube.com/watch?v=2Zx1MlCEvho
And do me a favor and subscribe to my channel if you haven't already.
Heres the video: https://www.youtube.com/watch?v=2Zx1MlCEvho
And do me a favor and subscribe to my channel if you haven't already.