The Siren Board

I went through the internet and old forms on this board. From what I was able to find is that it's a Decot of some sort. If it isn't a Decot, then its likely a HOR with a different housing.

Now that, my friend, looks like a Scream Master. I doubt it is, thought, because the only records of them are in California.

10V2T wrote: ↑

Wed Mar 24, 2021 4:37 pm

Now that, my friend, looks like a Scream Master. I doubt it is, thought, because the only records of them are in California.

All I can say is that is definitely not a scream master. The stator and shroud design are a dead giveaway.

I think this is some sort of HOR, they made different housings for their sirens. OT but Philadelphia had a couple Super-Sirex sirens.

Have a feeling it may be an HOR of some sort. I'm not 100% sure on that though but considering that it's within a reasonable distance of where HOR was essentially based out of, that's one of the likely candidates. Beyond that though, I have no clue.

It's definitely a Si-rex. The top shroud for it definitely H.O.R., and the motor is exposed from the shroud and that's what H.O.R. did with Si-Rexes. Unless I'm proven wrong, this is a HOR Si-rex S-10 or a converted Super Si-rex S-15.
Furthermore, the control box looks like a H.O.R. Controller on its side.
Unless this is somehow a Scream-Master...
Those are the only two options (that we know of. Hell, this could be a CLM with a custom shroud because CLM is actually an american company called Line Material Company. CLM is it's Canadian branch.)

Apologies for getting off-topic, but...

IceBolt_1003 wrote: ↑

Thu Mar 25, 2021 12:04 pm

Hell, this could be a CLM with a custom shroud because CLM is actually an american company called Line Material Company. CLM is it's Canadian branch.

I had absolutely no idea CLM was part of an American company, let alone a company that produced things that weren't at all similar to sirens. I assume CLM stands for Canadian Line Material (Company) or something similar? And did LMC themselves produce sirens or was it just CLM?

Some_3t22s wrote: ↑

Thu Mar 25, 2021 7:52 pm

Apologies for getting off-topic, but...

IceBolt_1003 wrote: ↑

Thu Mar 25, 2021 12:04 pm

Hell, this could be a CLM with a custom shroud because CLM is actually an american company called Line Material Company. CLM is it's Canadian branch.

I had absolutely no idea CLM was part of an American company, let alone a company that produced things that weren't at all similar to sirens. I assume CLM stands for Canadian Line Material (Company) or something similar? And did LMC themselves produce sirens or was it just CLM?

You're right about CLM being Canadian Line Material. LMC did produce a couple sirens, one of which is at the Stroud mall in Stroudsburg, PA.

IceBolt_1003 wrote: ↑

Fri Mar 26, 2021 11:46 am

Some_3t22s wrote: ↑

Thu Mar 25, 2021 7:52 pm

Apologies for getting off-topic, but...

IceBolt_1003 wrote: ↑

Thu Mar 25, 2021 12:04 pm

Hell, this could be a CLM with a custom shroud because CLM is actually an american company called Line Material Company. CLM is it's Canadian branch.

I had absolutely no idea CLM was part of an American company, let alone a company that produced things that weren't at all similar to sirens. I assume CLM stands for Canadian Line Material (Company) or something similar? And did LMC themselves produce sirens or was it just CLM?

You're right about CLM being Canadian Line Material. LMC did produce a couple sirens, one of which is at the Stroud mall in Stroudsburg, PA.

Y’all better be coming along with some receipts for this (preferably in another thread so we don’t derail this one). These are big claims.