Page 1 of 3

Unanderra Fire and Rescue Fedelcode looking siren

Posted: Mon Oct 04, 2021 11:37 pm
by SirensOfAustralia
Hi all, does anybody know what this siren is? Looks like a model 5/7 but with long legs?

https://www.google.com/maps/@-34.451154 ... 384!8i8192

Re: Unanderra Fire and Rescue Fedelcode looking siren

Posted: Tue Oct 05, 2021 1:21 pm
by NottaFoamer
most likely just a 5/7 with a custom shroud that makes it seem taller

Re: Unanderra Fire and Rescue Fedelcode looking siren

Posted: Tue Oct 05, 2021 2:15 pm
by uncommonsense
Have we considered this is not an American siren. It is in Australia.

Re: Unanderra Fire and Rescue Fedelcode looking siren

Posted: Tue Oct 05, 2021 3:17 pm
by CD_Siren
After poking around for a bit, this does not appear to be an official Federal Signal/Fedelcode product. After looking at the street view for a while, the quality of this siren seems relatively poor. Also, this siren is not quite the right size to be any Model X siren, so I guess this is a homemade siren.

Re: Unanderra Fire and Rescue Fedelcode looking siren

Posted: Tue Oct 05, 2021 8:49 pm
by Darley Champion
Since this is in Australia, I'd throw a guess that it's 1 Grifco with a custom Model 5/7-looking housing.

Re: Unanderra Fire and Rescue Fedelcode looking siren

Posted: Wed Oct 06, 2021 1:43 pm
by Kasey
SirensOfAustralia wrote:
Mon Oct 04, 2021 11:37 pm
Hi all, does anybody know what this siren is? Looks like a model 5/7 but with long legs?

https://www.google.com/maps/@-34.451154 ... 384!8i8192
I'm thinking it might be a Grifco.

Re: Unanderra Fire and Rescue Fedelcode looking siren

Posted: Wed Oct 06, 2021 3:12 pm
by championsiren
I wouldn't just slap "grifco" on there. It appears to have a chopper around the same size as a Model 7 and it also appears to have a support bar coming from the stator assembly going up into the shroud. It might be a Model 7 with a custom shroud. (Don't say that it's unreasonable for a siren to get shipped all the way there. I've seen several examples of sirens from Australia in America and vice versa.)

Re: Unanderra Fire and Rescue Fedelcode looking siren

Posted: Wed Oct 06, 2021 9:50 pm
by HudsonRiverSirens
championsiren wrote:
Wed Oct 06, 2021 3:12 pm
I wouldn't just slap "grifco" on there. It appears to have a chopper around the same size as a Model 7 and it also appears to have a support bar coming from the stator assembly going up into the shroud. It might be a Model 7 with a custom shroud. (Don't say that it's unreasonable for a siren to get shipped all the way there. I've seen several examples of sirens from Australia in America and vice versa.)
Where have you seen an Australian siren in America?

Re: Unanderra Fire and Rescue Fedelcode looking siren

Posted: Thu Oct 07, 2021 11:57 am
by championsiren
10V2T wrote:
Wed Oct 06, 2021 9:50 pm
championsiren wrote:
Wed Oct 06, 2021 3:12 pm
I wouldn't just slap "grifco" on there. It appears to have a chopper around the same size as a Model 7 and it also appears to have a support bar coming from the stator assembly going up into the shroud. It might be a Model 7 with a custom shroud. (Don't say that it's unreasonable for a siren to get shipped all the way there. I've seen several examples of sirens from Australia in America and vice versa.)
Where have you seen an Australian siren in America?
I've seen a couple model 7s, a presumed cyclone, and new Whelens (Vortexes I believe) are being installed every year.
And hey, the 888 was based off of the Model 2, so that technically counts as an American siren. And there's like 500 of those.

Re: Unanderra Fire and Rescue Fedelcode looking siren

Posted: Thu Oct 07, 2021 7:43 pm
by HudsonRiverSirens
championsiren wrote:
Thu Oct 07, 2021 11:57 am
10V2T wrote:
Wed Oct 06, 2021 9:50 pm
championsiren wrote:
Wed Oct 06, 2021 3:12 pm
I wouldn't just slap "grifco" on there. It appears to have a chopper around the same size as a Model 7 and it also appears to have a support bar coming from the stator assembly going up into the shroud. It might be a Model 7 with a custom shroud. (Don't say that it's unreasonable for a siren to get shipped all the way there. I've seen several examples of sirens from Australia in America and vice versa.)
Where have you seen an Australian siren in America?
I've seen a couple model 7s, a presumed cyclone, and new Whelens (Vortexes I believe) are being installed every year.
And hey, the 888 was based off of the Model 2, so that technically counts as an American siren. And there's like 500 of those.
But you said you've seen Australian sirens in America.