Ill jump in here bit first a disclaimer THE OPINIONS BELOW ARE THOSE OF ME AND IM NOT SPEAKING FOR ANY COMPANY THEY ARE FOR INFORMATIONAL AND DISCUSSION PURPOSES ONLY... There now my thoughts for what they are worth first full disclosure Ive been selling sirens since 1999... IF anyone disagrees with...

WESTFIELDS SIRENS WILL HAVE A FULL ON PLUGS OUT TEST TOMORROW MORNING AND AS LONG AS ALL GOES PLANNED WILL PARTICIPATE IN MEDINA COUNTY TEST SATURDAY AT NOON

BEST PART WAS WHEN MY GUYS PULLED DOWN 2001 STUFF THE BATTERIES WERE 10 YEARS OLD YOU'D THINK THEY WOULD OF BEEN REPLACED. THE LITTLE INDICATOR SAID IT WAS GOOD BUT Average life of a battery is 5 to 7 years max then they should be replaced especially if they are not load tested yearly which really i...

In the field I am replacing them due to maintaining issues the older ones had belts to spin them the newer use a gear with what amounts to a starter motor that requires yearly maintenance in most climates I literally just pulled down a 9 year old 2001 put up a 16 v2t main reason annual maintenance.....

Here is a link to the company Facebook page with more info...https://m.facebook.com/CAndKEarlyWarnin ... =bookmarks

Here is the fire station siren flying into position...Had to crane it over the building...

Sirens have arrived we should be hanging them next week attached is a freshly uncrated 16V1TB...

For all of you Ohio Siren Hunters we will be installing 4 Sentry Siren 16V1T-B is Westfield Ohio (Medina County) mid - June plus a Storm Sentry IPAWS to control the system... When said and done should be the most advanced system in NE Ohio probably number 2 in the state...

both were pre 1960 I bet the motors weighed 200 pds easy the M10 had a peerless motor in it and the oil caps for the bearings we rewound it blasted it painted the works then they ran it for at least 15 min and ca pow on the 4th or 5th time doing that...

Id pay attention to the duty cycle I had an old model 5 a client rebuilt and it blew the armature clean off because the client ran it 15 minutes at a time Id never seen that before the motor shop had said it was from overheating due to the cycle most of those old motors were a 10 min max run time an...