User avatar
NahIDee
Registered User
Registered User
Posts: 241
Joined: Sun Jul 23, 2017 2:00 am
Real Name: Connor B
YouTube Username: jcb19 (formerly AGuyNamedJC)
Discord: somebody2950
Location: St. Paul, Nebraska
Contact: YouTube

Re: Weltex Sirens?

Tue Dec 01, 2020 2:48 pm

sheppardpat47 wrote:
Tue Dec 01, 2020 1:34 pm
The thing is that I've seen quite a few pictures of them, and they appear to be either 9 ports or 12 ports (I guess?)
For the HP I didn't knew but look at the pictures, it seems that there is two models of this siren, one with the 9 ports and one with the 12 ports, and the one with the 9 ports looks like it's the one that's the so called "paint can" house on it

https://ibb.co/GF9Yrg4 Credit : Adam Polak
https://ibb.co/WVHsqpk Credit : Google Maps (I don't know the location..)
https://ibb.co/HBRPyLP Credit : Ty Bellfy
https://ibb.co/QkQbY7j Credit : Donald Osmer
https://ibb.co/mBd9Shk Credit : Donald Osmer (Owner of this weltex 9 port!)
https://ibb.co/hgpcns2 Credit : Eddie F Whirley III, it is active but it isn't used anymore!
https://ibb.co/vBkznP4 Credit : Adam Polak, by the way I think it's the best looking one in the world
https://ibb.co/SynZ1Yp Credit : Dave Fritz
https://ibb.co/y5vYBcH Credit : Dave Fritz (Maybe it's the last one with all the housings? It's a 9 port)

That's the only pictures I've found for now, some of them were on the Facebook group by the way, I hope all these pictures can help ! I post them for the non-Facebook users maybe :)
The third one down on the list (The one taken by Ty Bellfy) was discovered not too long ago to be a vertical B&M siren.
Greetings from Saint Paul, Nebraska!

Proud owner of an ACA Alertronic AL-4000, Alertronic AL-6000R, Cyclone 120, Gen-1 Allertor 125, Gen-3 Allertor 125, nine Penetrators, four Banshees, and a B&N BN44E!

User avatar
sheppardpat47
Registered User
Registered User
Posts: 70
Joined: Sun Feb 23, 2020 6:13 pm
Real Name: Thomas Seminerio
YouTube Username: sheppardpat47
Discord: Thomas Seminerio#2368
Location: Wavre, Belgium
Contact: Twitter

Re: Weltex Sirens?

Tue Dec 01, 2020 2:59 pm

NahIDee wrote:
Tue Dec 01, 2020 2:48 pm

The third one down on the list (The one taken by Ty Bellfy) was discovered not too long ago to be a vertical B&M siren.
Actually he said that it's not B&M, but I'm not sure about that, it's pretty difficult to say who is right and who's wrong actually... I hope this VFD station will finally restore that sirens, since they said that they WILL do it but it was one year ago so...
I'm Belgian
So... Never heard a siren before :(

User avatar
NahIDee
Registered User
Registered User
Posts: 241
Joined: Sun Jul 23, 2017 2:00 am
Real Name: Connor B
YouTube Username: jcb19 (formerly AGuyNamedJC)
Discord: somebody2950
Location: St. Paul, Nebraska
Contact: YouTube

Re: Weltex Sirens?

Tue Dec 01, 2020 4:30 pm

sheppardpat47 wrote:
Tue Dec 01, 2020 2:59 pm
NahIDee wrote:
Tue Dec 01, 2020 2:48 pm

The third one down on the list (The one taken by Ty Bellfy) was discovered not too long ago to be a vertical B&M siren.
Actually he said that it's not B&M, but I'm not sure about that, it's pretty difficult to say who is right and who's wrong actually... I hope this VFD station will finally restore that sirens, since they said that they WILL do it but it was one year ago so...
The tag on the motor is the same of those that are seen on other large B&M sirens, according to Oliver Valerio.
Last edited by NahIDee on Tue Dec 01, 2020 7:05 pm, edited 1 time in total.
Greetings from Saint Paul, Nebraska!

Proud owner of an ACA Alertronic AL-4000, Alertronic AL-6000R, Cyclone 120, Gen-1 Allertor 125, Gen-3 Allertor 125, nine Penetrators, four Banshees, and a B&N BN44E!

User avatar
sheppardpat47
Registered User
Registered User
Posts: 70
Joined: Sun Feb 23, 2020 6:13 pm
Real Name: Thomas Seminerio
YouTube Username: sheppardpat47
Discord: Thomas Seminerio#2368
Location: Wavre, Belgium
Contact: Twitter

Re: Weltex Sirens?

Tue Dec 01, 2020 6:50 pm

NahIDee wrote:
Tue Dec 01, 2020 4:30 pm
sheppardpat47 wrote:
Tue Dec 01, 2020 2:59 pm
NahIDee wrote:
Tue Dec 01, 2020 2:48 pm

The third one down on the list (The one taken by Ty Bellfy) was discovered not too long ago to be a vertical B&M siren.
Actually he said that it's not B&M, but I'm not sure about that, it's pretty difficult to say who is right and who's wrong actually... I hope this VFD station will finally restore that sirens, since they said that they WILL do it but it was one year ago so...
The tag on the motor is the same of those that are seen on other large B&M sirens, according to Edaan Friedman.
Actually because the motor was manufactured by the same company I guess, it have the same logo but it's not "B&M" branded
I'm Belgian
So... Never heard a siren before :(

User avatar
NahIDee
Registered User
Registered User
Posts: 241
Joined: Sun Jul 23, 2017 2:00 am
Real Name: Connor B
YouTube Username: jcb19 (formerly AGuyNamedJC)
Discord: somebody2950
Location: St. Paul, Nebraska
Contact: YouTube

Re: Weltex Sirens?

Tue Dec 01, 2020 7:31 pm

sheppardpat47 wrote:
Tue Dec 01, 2020 6:50 pm
NahIDee wrote:
Tue Dec 01, 2020 4:30 pm
sheppardpat47 wrote:
Tue Dec 01, 2020 2:59 pm


Actually he said that it's not B&M, but I'm not sure about that, it's pretty difficult to say who is right and who's wrong actually... I hope this VFD station will finally restore that sirens, since they said that they WILL do it but it was one year ago so...
The tag on the motor is the same of those that are seen on other large B&M sirens, according to Oliver Valerio.
Actually because the motor was manufactured by the same company I guess, it have the same logo but it's not "B&M" branded
Never mind, just checked the FB page and saw that it was discovered to be a Weltex. Guess I never saw the post that said it was a Weltex :roll:
Greetings from Saint Paul, Nebraska!

Proud owner of an ACA Alertronic AL-4000, Alertronic AL-6000R, Cyclone 120, Gen-1 Allertor 125, Gen-3 Allertor 125, nine Penetrators, four Banshees, and a B&N BN44E!

User avatar
sheppardpat47
Registered User
Registered User
Posts: 70
Joined: Sun Feb 23, 2020 6:13 pm
Real Name: Thomas Seminerio
YouTube Username: sheppardpat47
Discord: Thomas Seminerio#2368
Location: Wavre, Belgium
Contact: Twitter

Re: Weltex Sirens?

Tue Dec 01, 2020 9:05 pm

No problem mate haha!
I'm Belgian
So... Never heard a siren before :(

User avatar
LukeH
Registered User
Registered User
Posts: 698
Joined: Wed Mar 20, 2013 4:43 pm
Real Name: Luke
Location: Mid Michigan

Re: Weltex Sirens?

Sat Dec 05, 2020 6:25 am

sheppardpat47 wrote:
Tue Dec 01, 2020 1:34 pm
The thing is that I've seen quite a few pictures of them, and they appear to be either 9 ports or 12 ports (I guess?)
For the HP I didn't knew but look at the pictures, it seems that there is two models of this siren, one with the 9 ports and one with the 12 ports, and the one with the 9 ports looks like it's the one that's the so called "paint can" house on it

https://ibb.co/GF9Yrg4 Credit : Adam Polak
https://ibb.co/WVHsqpk Credit : Google Maps (I don't know the location..)
https://ibb.co/HBRPyLP Credit : Ty Bellfy
https://ibb.co/QkQbY7j Credit : Donald Osmer
https://ibb.co/mBd9Shk Credit : Donald Osmer (Owner of this weltex 9 port!)
https://ibb.co/hgpcns2 Credit : Eddie F Whirley III, it is active but it isn't used anymore!
https://ibb.co/vBkznP4 Credit : Adam Polak, by the way I think it's the best looking one in the world
https://ibb.co/SynZ1Yp Credit : Dave Fritz
https://ibb.co/y5vYBcH Credit : Dave Fritz (Maybe it's the last one with all the housings? It's a 9 port)

That's the only pictures I've found for now, some of them were on the Facebook group by the way, I hope all these pictures can help ! I post them for the non-Facebook users maybe :)
The siren photographed by Ty Bellfy is actually a B&M siren. Note the 4 leg mount and overall differences in design. Though the motor is similar, much better photos were posted and as I recall there was a pretty obvious B&M logo in a zoomed in shot of the tag.

EDIT: Now I see more replies to the tread pointing this out. Oh well.

On another note I've yet to see any hard evidence of the paintcan housing sirens actually being manufactured by Weltex. Nor do I see any similarities in the sirens Adam posted to the paintcan style sirens that have been found, other than being remotely similar in design. Just hearsay and assumptions. So if anyone has a photo of the tag on one of these things I'd love to see it.

I HATE to be that guy, but being in this community for such a long time has taught me what we think we ALL know can be totally incorrect as new information is posted. Unfortunately it seems some of us have information and refuse to share it because of the "I know something you don't know" mentality. Never good for history. But I suppose that's public forum.
Resident Historian
Denver Siren Expert
Michigan

User avatar
Synther
Global Moderator
Global Moderator
Posts: 1061
Joined: Fri Jul 10, 2015 5:57 am
YouTube Username: UtahSirens
Location: Utah
Contact: YouTube

Re: Weltex Sirens?

Sat Dec 05, 2020 9:49 am

Remingtoncountry wrote:
Sat Dec 05, 2020 6:25 am
On another note I've yet to see any hard evidence of the paintcan housing sirens actually being manufactured by Weltex. Nor do I see any similarities in the sirens Adam posted to the paintcan style sirens that have been found, other than being remotely similar in design. Just hearsay and assumptions. So if anyone has a photo of the tag on one of these things I'd love to see it.

I HATE to be that guy, but being in this community for such a long time has taught me what we think we ALL know can be totally incorrect as new information is posted. Unfortunately it seems some of us have information and refuse to share it because of the "I know something you don't know" mentality. Never good for history. But I suppose that's public forum.
I'd say the biggest similarities between the Weltex in Adam Pollak's first pic and the siren in Donald Osmers' pic is the the legs on both sirens have the same bend in them, and both sirens have nearly identical stator designs. It seems they sold different sizes of sirens, with the design varying slightly between all of them.
State of Utah siren map - My channel
STH-10, SD-10, 2 Model 2s

User avatar
SamtheSirenMan(531)
Registered User
Registered User
Posts: 120
Joined: Mon Dec 07, 2020 10:07 pm
Real Name: Samuel F
Location: Northwest Oregon, USA

Re: Weltex Sirens?

Fri Dec 25, 2020 8:33 pm

I might have found one: https://goo.gl/maps/Wk1nYj7na2FFBrLc6
I posted it in mystery sirens, and I was told it’s either a Weltex, or an E.D. Bullard. I’m going with a Weltex missing its top hat thing, as it doesn’t have the conical chopper that vertical Bullards do. It’s only a 40 minute drive from me, so I might be able to ask the fire department about it.
Siren enthusiast of about four to five years, one of the few siren YouTubers of Oregon
Owner of a (now functional!) 1969 STH-10 and a few other small sirens
Oregon State Siren Map V. 2
Email(best contact method): [email protected]

User avatar
CD_Siren
Registered User
Registered User
Posts: 475
Joined: Fri Dec 27, 2019 6:04 pm
Real Name: Carl Clark
Discord: cdsiren
Location: Arkansas, USA
Contact: Website

Re: Weltex Sirens?

Sat Dec 26, 2020 1:25 am

SamtheSirenMan(531) wrote:
Fri Dec 25, 2020 8:33 pm
I might have found one: https://goo.gl/maps/Wk1nYj7na2FFBrLc6
I posted it in mystery sirens, and I was told it’s either a Weltex, or an E.D. Bullard. I’m going with a Weltex missing its top hat thing, as it doesn’t have the conical chopper that vertical Bullards do. It’s only a 40 minute drive from me, so I might be able to ask the fire department about it.
Seems to be a Weltex.
Alright, maybe I'll post a few more times

Return to “Main Outdoor Warning Sirens Board”

Who is online

Users browsing this forum: Google [Bot] and 5 guests