Sun Dec 06, 2020 9:59 am
An AR timer will work perfectly fine to control the siren. You'll need to get ahold of a motor contactor that matches the specs of the motor and that should be the bare basics to get it running after wiring up your control system. If you want to take it one step further, you can get your hands on a flasher to control the dampers and wire it into one of the signals on the AR. They should be relatively easy to find as they're commonly found in traffic light control systems, including the ones Federal used for the RCM3 and RC6.
Also take note that your unit is 3 phase, requiring 3 phase power service or a generator. You can't run it on single phase service.
My knowledge excels on the Federal Thunderbolt siren and SiraTone EOWS sirens. ¯\_(ツ)_/¯
Proud owner of
2014 Federal UltraVoice UVICU
1981 SiraTone C/B prototype
1984 SiraTone C/B